Aeotec Z-Wave Plus Nano Dimmer with energy metering
New generation z-wave plus Aeotec nano dimmer offers total wireless dimming control of lights in a small z-wave module that has built-in energy monitoring. Nano dimmer is designed to be installed behind any existing wall switches so you have remote and local controls.
Aeotec Z-wave Plus Nano Dimmer with energy metering
Designed to be installed behind existing switch to seamless control your lights (on/off or dimming) via Z-Wave Plus Gen5 wireless technology. It lets you control on/off, dim, and monitor your lights from anywhere, anytime. Using your home controller, set scenes to automatically control lights for piece of mind and total convenience.
Designed to be compatible with a wide range of lights including both leading and trailing edge LED lighting
Nano Dimmer has many uses with it's ability to work with many different types of lights like LED, CFL, Fluorescent, Incandescent and Halogen.
With dimming function (On/Off/Dim control)
- Incandescent bulbs,
- Halogen bulbs with or without electronic transformer,
- Dimmable LED bulbs (leading edge and trailing edge),
- Dimmable Fluorescent lamps.
Without dimming function (On/Off control only)
- Non-dimmable bulbs,
- Compact fluorescent lamps with electronic rectifier,
- Fluorescent tube lamps with electronic ballast,
- General non-dimmable LED Bulbs
Minimum load power requirement
If the total load for your lights is less you will need to add the Aeotec bypass
3-wire Installation with Neutral Wire
2-wire Installation without Neutral Wire
Maximum total load
Control your lights and control your ceiling fans. Nano Dimmer can be wired to turn select ceiling fans as powerful as 100 watts on and off, and control their speeds.
Designed to fit behind a wall switch without compromising on safety, Nano Dimmer measures a slender 4.2cm x 4cm x 2.5cm (1.65” x 1.6” x 0.98”)
See your spend.
It powers automation and scheduling, and it also monitors energy monitor. Nano Dimmer comes in an edition infused with Aeotec’s super-accurate energy metering technology which records electricity use with 99% accuracy.
Nano Dimmer is a part of Aeotec’s Gen5 range and is engineered upon the latest version of Z-Wave Plus. From lower power consumption to a 250% faster response time, Nano Dimmer is laden with benefits you’ll never see, only feel.
Without using any more energy, Nano Dimmer offers greater wireless reliability than all before it. Its wireless signal is now +2.5dBM more powerful so that Nano Dimmer can offer a 50% greater wireless range that’s up 150 metres / 492 feet wide.
Technology changes and Nano Dimmer changes with it. Nano Dimmer allows for firmware updates to be wirelessly installed via Z-Wave Plus so that it remains at the cutting edge.
Because of the high amps it carries and to avoid issues such as stray voltage Nano dimmer only works with switches and outlets that utilise a neutral wire.
It’s quicker to install and it’s also easier to wire. Now 60% smaller than previous in-wall dimmer, Nano dimmer fits into even tighter spaces. It also connects to wires 25% thicker than past models.
Because of the power of Gen5, Nano Dimmer offers banking-grade, AES-128 bit encryption to protect the wireless communication that your connected home depends on and is run on.
The power of Z-Wave means that Nano Dimmer can be intelligently automated. But it can also be scheduled to switch on and off on a timer independently, even when Z-Wave your gateway has connection issues.
DIN rail compatible.
Want to use it with a DIN rail? Pair Nano Dimmer with a generic DIN housing or module box for DIN rail compatibility and you’ll be able to use it with DIN rail systems.
|Repeats z-wave signals||Yes|
|Neutral wire requirement||No|