Aeotec Z-Wave Plus Single Nano Switch with energy metering
Next generation z-wave plus Aeotec nano switch offers total wireless control of lights and appliances in a small z-wave module that has built-in energy monitoring. Nano Switch is designed to be installed invisibly behind any of your home’s existing switches or power sockets. Your old switches are instantly modern and easily connected to your home controller for convenience and security.
Aeotec Z-wave Plus Single Nano Switch with energy metering
Designed to be installed behind existing switch or socket, Nano Switch offers seamless wireless control via Z-Wave Plus Gen5. It lets you control on/off, automate, and monitor your lights from anywhere, anytime. Using your home controller, set scenes to automatically turn on lights and appliances for piece of mind and total convenience.
Nano Switch has many uses with it's ability to work with high voltage 240V and low voltage. It can be used to control 24VDC electronics such as motors, light strips, alarms, doorbells, and other low-powered devices. It even has the ability to be powered by 240V but triggers an alternative voltage like low voltage lights.
Designed to control sockets, switches and non-dimming lights powerfully. Nano Switch can control up to 15 amps of power while Dual Nano Switch can control up to 10 amps.
Designed to fit behind a wall switch without compromising on safety, Nano Switch measures a slender 4.2cm x 4cm x 2.5cm (1.65” x 1.6” x 0.98”) while Dual Nano Switch offers twice the control at only 4.4cm x 4cm x 2.5cm.
See your spend.
It powers automation and scheduling, and it also monitors energy monitor. Nano Switch comes in an edition infused with Aeotec’s super-accurate energy metering technology which records electricity use with 99% accuracy.
Nano Switch is a part of Aeotec’s Gen5 range and is engineered upon the latest version of Z-Wave Plus. From lower power consumption to a 250% faster response time, Nano Switch is laden with benefits you’ll never see, only feel.
Without using any more energy, Nano Switch offers greater wireless reliability than all before it. Its wireless signal is now +2.5dBM more powerful so that Nano Switch can offer a 50% greater wireless range that’s up 150 metres / 492 feet wide.
Technology changes and Nano Switch changes with it. Unlike previous models, Nano Switch allows for firmware updates to be wirelessly installed via Z-Wave Plus so that it remains at the cutting edge.
Because of the high amps it carries and to avoid issues such as stray voltage Nano Switch only works with switches and outlets that utilise a neutral wire.
It’s quicker to install and it’s also easier to wire. Now 60% smaller than previous in-wall switches, Nano Switch fits into even tighter spaces. It also connects to wires 25% thicker than past models.
Because of the power of Gen5, Nano Switch offers banking-grade, AES-128 bit encryption to protect the wireless communication that your connected home depends on and is run on.
The power of Z-Wave means that Nano Switch can be intelligently automated. But it can also be scheduled to switch on and off on a timer independently, even when Z-Wave your gateway has connection issues.
DIN rail compatible.
Want to use it with a DIN rail? Pair Nano Switch with a generic DIN housing or module box for DIN rail compatibility and you’ll be able to use it with DIN rail systems.
Low voltage too.
Nano Switch is great with high voltage and low voltage. It can be used to control 24VDC electronics such as light strips, alarms, doorbells, and other low-powered devices.
|Repeats z-wave signals||Yes|
|Neutral wire requirement||Yes|