Fibaro Z-Wave in-wall Single Relay Switch 2.5kW
Fibaro single relay switch is designed to be installed behind standard wall switch where you want to turn on/off an electrical device like lights, pumps, appliances and heating. It can handle load of up to 2.5kW so is suitable for most household applications. Local controls via the wall switch is still possible with the added benefit of wirelessly controlling it from anywhere.
Fibaro Z-Wave In-Wall Single Relay Switch
Wireless Z-wave controlled Fibaro On/Off Relay Switch is designed to be installed in behind existing wall switch, or anywhere else where it is necessary to operate an electric device up to 240V 10A. Fibaro On/Off Relay Switch can switch on or off connected device either through z-wave system or directly through the wall switch connected directly to it.
Use this relay to automate your lights, pumps, motor, sprinklers etc . This is a 3 wire device requiring a live and neutral connection.
♦ Control On/Off control of devices
♦ Ease of use and installation by qualified electrican only
♦ Optimised antenna range for indoor use, up to 20m
♦ Max 2.5kW circuit 240V
♦ Z-wave and manual operations
♦ Small form factor that can be easily hidden away
Integrates with all certified Z-Wave controllers in Australian ffrequency (921.42MHz)
Technical Specifications
|
Description
|
|
|
RF Protocol
|
Z-Wave (Multilevel Command Class)
|
|
Z-wave device type
|
Z-wave binary switch, routing slave
|
|
Operating Voltage
|
AC 240V / 50Hz
|
|
Max Loading
|
2.5kW circuit
|
|
RF Frequency
|
921.42Mhz - AU/NZ approved RF for Z-wave
|
|
Operation Range
|
Up to 20m when no obstacles
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
10 ~ 40 °C
|
|
Overheating protection
|
105 degrees
|
|
Housing
|
ABS
|
|
Dimensions
|
42.5 mm long, 37.0 mm wide and 15.9 mm high |
| Repeats z-wave signals | Yes |
|---|---|
| DIY | No |
| Electrican Required | Yes |
| Neutral wire requirement | Yes |
