Fibaro Z-Wave in-wall Double Relay Switch (2 x 1.5kW)

Fibaro
Special Price A$106.00 Regular Price A$119.00
In stock
SKU
FGS-222

Fibaro on / off dual relay switch is designed to be installed behind standard wall switch or anywhere else where it is necessary to operate 2 x electric circuits or devices of up to 1.5KW each. It can control connected device either through z-wave or through the wall switch connected directly to it.

Fibaro Z-Wave In-Wall Double Relay Switch (2 x 1.5kW)

Fibaro Double On/Off Relay Switch is designed to be installed in standard wall-switch boxes, or anywhere else where it is necessary to operate two independent devices of  up to 1.5kW each. Fibaro Double On/Off Relay Switch can switch on or off connected devices either through z-wave or through the local wall switch connected directly to it.  

Easily transform your existing light switch to an automated one or use it to control other electric appliances like pumps, motor, sprinklers etc .  This is a 3 wire device requiring a live and neutral connection.  The switching relay contacts are isolated so it can also be used to switch low voltage DC circuits.  Both relays share a common input terminal so both loads must operate on the same supply whether AC or DC. Its compact size means that it can be fitted inside wall boxes if there is sufficient depth or it can located anywhere between the switch and load.  

♦ Control On/Off control of home lighting and can handle two separate circuits
♦ Ease of use and installation by qualified electrican only
♦ Optimised antenna range for indoor use, up to 20m
♦ Max 1500W each circuit 240V
♦ Z-Wave RF frequency 921.42MHz (Aus/NZ)
♦ Z-wave and manual operations
♦ Integrates with all certified AUS/NZ Z-Wave controllers
♦ Small form factor that can be easily hidden away

Technical Specifications

Description
 
RF Protocol
Z-Wave (Multilevel Command Class)
Z-wave device type
Z-wave binary switch, routing slave
Operating Voltage
AC 230V / 50Hz
Max Loading
1500W each circuit (3KW total)
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Operation Range
Up to 30m when no obstacles
Application
Indoor use only
Operation temperature
0 ~ 55 °C
Storage temperature
-10 ~ 70 °C
Weight
70g
Housing
ABS
More Information
Repeats z-wave signalsYes
DIYNo
Electrican RequiredYes
Neutral wire requirementYes
You may also like!