Vision Z-Wave Wireless Siren and Strobe (mains powered with backup power)
New edition of the z-wave siren and strobe that is mains powered and contains backup power! Perfect to use in z-wave alarm systems so you can have continuous audio and visual warning even when the power is cut.
Vision Z-Wave Wireless Siren and Strobe with mains power
Designed to be used in a z-wave alarm systems, this AC powered siren and strobe with backup battery is not affected by power outage in your home. Combine this with the alarm grade PIR motion sensor and you have the ideal and perfect z-wave wireless alarm system that is reliable and feature rich!
Z-Wave Wireless Siren and Strobe is fully programmable with Z-Wave Gateways to provide audible and visual alarm based on your Home Automation and /or Security Network settings. Speaks Z-Wave and allows for full operation with other Z-Wave enabled devices. Has Loud Audible Alarm > 105dB@1m and LED Strobe Lighting. Can be configured to trigger siren or strobe only for added flexibility. Powered by included AC adapter and has builtin backup battery power.
♦ 105dB siren sound
♦ With Red flashing strobe light
♦ Low battery indication
♦ Integrates with all certified Z-Wave controllers in Australian frequency (921.42MHz)
Technical Specifications
|
Description
|
|
|
RF Protocol
|
Z‐Wave (Binary Command Class)
|
|
Z‐wave device type
|
Z-wave binary switch, routing slave
|
|
Operating Voltage
|
12V DC (AC adaptor included)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Operation Range
|
Up to 30m when no obstacles
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
0 ~ 55 °C
|
|
Storage temperature
|
‐10 ~ 80 °C
|
|
Weight
|
130g (excluding AC adaptor)
|
|
Housing
|
ABS
|
| Repeats z-wave signals | No |
|---|---|
| DIY | Yes |
| Electrican Required | No |
