TKB Philio Z-Wave PIR, Door Window, Light and Temperature Sensor (4 in 1)

TKB Home
A$92.00
In stock
SKU
TSM02

The smallest and most discrete motion sensor!  The TKB / Philio 4-in-1 Z-Wave Sensor combines a PIR, door/window sensor, a light sensor and a temperature sensor in one small package. Now you don't need 2 separate products to detect motion, monitor the door status and report back on the room temperature and light level!

TKB Philio Z-Wave PIR, Door Window, Light and Temperature Sensor

This small sensor combines a PIR motion detector, Door/Window, Temperature and Luminosity sensor in a battery-powered Z-Wave device with a small form factor.   The sensor is only 28 x 96 x 23 mm and the magnet size 10 x 50 x 12 mm.  This is the smallest z-wave motion sensor yet is full of features!

The unit is small and contains four sensors that report values to the Z-Wave controller:

♦ Door/Window Sensor - Detects the opening or closing of a window, door, gate or roller blind
♦ Temperature Sensor - Measures the room's temperature
♦ Luminosity - Measures a room’s light level (LUX) 

♦  Motion Sensor - detects movement

With this door/window sensor you no longer need separate sensors in the room to measure/report on temperature and light levels for your automation scenes. Now you can create scenes like when you open the door it will only turn on the room light if it's dark!  Or use the built-in motion sensor to only activate scenes if the door is closed and there is motion.

The sensor instantly reports temperature and light levels back to the home controller whenever the sensor is triggered which means the values are always up to date.  Under normal residential conditions and if using lithium battery (not included) the battery life will last 2-3 years !

Note: This product is not fully compatible with Fibaro Home Centre

Features

♦ Newest Z-wave 400series chip, support multichannel operation and higher data rate (9.6/40/100kbps)
♦ Higher output power (+2.5dBm output power as compared to -2.5dBm 300 series Z-wave module) to enhance the communication range
♦ Built in illumination sensor while applied to light control
♦ Adopt Z-Wave protocol to secure the success of wireless two way communication
♦ With Tamper proof protection
♦ Easy install
♦ Low battery indication
♦ Z-Wave V6.02
♦ Auto report the open/close status and battery status

More Information
Repeats z-wave signalsNo
DIYYes
Electrican RequiredNo
You may also like!