INSTEON RemoteLinc 2 Remote Paddle
The RemoteLinc 2 Paddle remote is an easy-to-use wireless mini-remote. Like a traditional switch, tapping the top paddle turns your lights (or scenes) on and tapping the bottom paddle turns your lights (or scenes) off; press and hold the top paddle to brighten every light in the scene or press and hold the bottom paddle to dim every light in the scene. The LED status indicator blinks green for ON commands and red for OFF commands. The LED indicator will also let you know if a device did not acknowledge the command.
INSTEON RemoteLinc 2 Remote Paddle
The Mini Remote is an easy-to-use remote that allows you to control INSTEON dimmers, switches and plug-in or receptacle dimmers. Now you can raise and lower light levels and program scenes for multiple lights and appliances from anywhere. Mount it to the wall to create a traditional switch in the perfect location - without having to rewire using the optional 1 gang or 2 gang wall plate.
You can also make it a tabletop control for your nightstand, counter or coffee table by attaching it to a tabletop stand (sold separately); turn on your house lights from the car by attaching it to a visor clip (sold separately); or even use it as a lightweight handheld remote. The Mini Remote is ultra-easy to install and operate, giving you the most flexibility for a truly smart home with INSTEON.
How it works
Like a traditional wall switch, tapping the top paddle turns your lights (or scenes) on and tapping the bottom paddle turns your lights (or scenes) off; press and hold the top paddle to brighten every light in the scene or press and hold the bottom paddle to dim every light in the scene. The LED status indicator blinks green for ON commands and red for OFF commands. The LED indicator will also let you know if a device did not acknowledge the command.
Additional programming options allow Mini Remote to function as a 2-scene controller, making the top paddle control one scene and the bottom paddle control another. This can be set to alternate between ON and OFF for each press (toggle) or only send ON (non-toggle). Other handy features include:
♦ Power switch for disabling buttons ("vacation" or "pocket" mode)
♦ Stuck Button Mode - saves battery life by going to sleep if button stuck down
♦ Built-in battery charge LED indicator
The INSTEON Mini Remote is powered by an internal rechargeable lithium battery. Based on average usage, expected battery life between charges is 9-12 months. Recharge using any standard USB Type A to Micro-B cable.
♦ Provides wireless remote control for INSTEON controlled lighting and appliances
♦ Elegant design and super-easy setup
♦ Add a wall switch anywhere, no new junction box or wiring required
♦ Raise and lower lighting levels or recall a favorite lighting level - wirelessly!
♦ Control lights in one room or across the entire house
♦ Battery operated - requires no external power or communication wiring and it's rechargeable
♦ 15m range to nearest dual-mesh INSTEON device or Access Point
The Mini Remote is a small, single-button wireless remote for operating INSTEON scenes and responders. Optional mounting accessories available.
|Product Name:||INSTEON RemoteLinc 2 Wireless Remote (Paddle)|
|Regions:||Australia and New Zealand|
|In the box:||INSTEON RemoteLinc2 Single-Button Remote|
|Scenes:||1 (default), configurable to 2|
|Scene Configurations:||1 On/Off (default), 2 Toggle or 2 Always On|
|Scene Commands Supported:||On / Off, Fast on / Fast off, Begin brighten / End brighten, Begin dim / End dim|
|Frequency RF:||921MHz ISM Band|
|RF Range:||45m +|
|LED Type:||Two-color: Green and Red|
|LED During Use:||Green Flash Once (On, Bright, Fast On), Red Flash once (Off, Dim, Fast Off), Red Blink for ~3 Seconds (Scene Acknowledge Missing)|
|Setup Memory:||Non-volatile EEPROM|
|Casing:||UV stabalized plastic (INSTEON White)|
|Operating Conditions:||Indoors / Outdoors, 0° C to 48° F, up to 85% relative humidity|
|Dimensions:||33mm W x 66mm H x 10mm D|
|Power:||3.7 VDC Lithium Polymer, Rechargeable, non-replaceable|
|Battery Charge Hold Duration:||9-12 months based on average 16 button presses per day (will decrease over time)|
|Battery Recharging Cycles:||>500|
|Recharging Jack:||Standard, Micro-USB, 5VDC|
|Recharging Time:||1 hour|
|Certification:||Approved for use in Australia and New Zealand|