Ctec Wi-Fi enabled smart wall switch - 2 Gang White (Google Home, Alexa)

In stock

The cheapest and easiest way to make your home a smart home! If you only need a 'simple' home automation setup then these Wi-Fi enabled wall switches are for you. No additional smart home controller required since all intelligence is in the switch and app. Control and monitor 2 lights/appliances from anywhere in the word using your smart phone.

Ctec Wi-Fi enabled smart wall switch - 2 Gang (White)

Experience the benefits that home automation has to offer at a fraction of the cost of other full automation systems.  The Ctec Smart Light Switch is a Wi-Fi enabled switch designed to replace an existing light switch panel on your wall to control 2 independent lights or appliances and doesn't require a smart home controller. 

The switch is made to Australian standards and sizes and can used for new homes or retrofitted to existing ones by simply replacing your current wall switch (Neutral wire & qualified electrician required) 

Via the smartphone app you can remotely from anywhere turn lights on or off, create groups, create scenes, or set a time to automatically turn lights on or off. Groups can control a number of lights and scenes can set the mood for night, away-from-home and more.

The Wi-Fi switch connects to the your existing home wifi 2.4GHz band (802.11b/g) and enables full remote controls but can still work as a normal touch panel switch for local controls.  The Ctec Smart Light Switches come in one, two, or three-switch versions and also non-Wi-Fi version so you can match the rest of the house with these wall switches. Easy to use and intuitive app allows you to control your lights and devices just at a click. 

See the full range of Wi-Fi switches 


Set scenes in smartphone app to group and operate your devices just at a button click.  




Type:                                       Wifi Light Switch

Size:                                         120mm×74×32mm

Panel:                                       Tempered Crystal Glass

Bottom Materials:                     Retardant PC

Rated Voltage:                          AC 100-250V 50/60Hz

Max Current/Rated Current:    10A/3A

Standby Current:                      0.001A

Rated Load:                              200W

Load type:                                 Incandescent lamp, energy saving lamp, fluorescent

Standby power:                         0.25W

Operating temperature:            -25 degree to +60 degree

Relative humidity:                    <95%

GSSS Std.:                                802.11b/g/n

WiFi Safe mode:                      WEP/WPA/WPA2 (AES and TKIP for Personal)

Wi-Fi Performance Transmission Power: +20dBm,11Mbps(CCK)

Wi-Fi Performance Receiver Sensitivity: -89dBm,11Mbps(CCK)W

More Information
Electrican RequiredYes
Neutral wire requirementYes