Ctec Wi-Fi voice enabled (Google Home, Alexa) smart curtain controller switch
The cheapest and easiest way to make your home a smart home! If you only need a 'simple' home automation setup then these Wi-Fi enabled wall switches are for you. No additional smart home controller required since all intelligence is in the switch and app. Control and monitor your lights & appliances from anywhere in the word using your smart phone.
Ctec Wi-Fi enabled smart curtain controller switch with Google Home & Alexa support
Experience the benefits that home automation has to offer at a fraction of the cost of other full automation systems. The Ctec Smart Light Switch is a Wi-Fi enabled switch designed to replace an existing light switch panel on your wall and doesn't require a smart home controller.
The switch is made to Australian standards and sizes and can used for new homes or retrofitted to existing ones by simply replacing (qualified electrician required) your current wall switch
Via the smartphone app you can remotely from anywhere open or close the curtains, create groups, create scenes, or set a time to automatically turn fan on or off. Groups can control any ctec wi-fi devices and scenes can set the mood for night, away-from-home and more.
The Wi-Fi switch connects to the 2.4GHz band (802.11b/g) can still work as a normal touch panel switch for local controls. Also available are Ctec Smart Light Switches that come in one, two, or three-switch versions and also non-Wi-Fi version so you can match the rest of the house with these wall switches.
See the full range of Wi-Fi switches
Easy to use and intuitive app allows you to control your lights and devices just at a click or control your lights using your voice (Google Home, Amazon Echo required and sold separately)
Set scenes in smartphone app to group and operate your devices just at a button click.
Type: Wifi curtain Switch
Panel: Tempered Crystal Glass
Bottom Materials: Retardant PC
Rated Voltage: AC 100-250V 50/60Hz
Max Current/Rated Current: 10A/3A
Standby Current: 0.001A
Rated Load: 200W
Load type: Incandescent lamp, energy saving lamp, fluorescent
Standby power: 0.25W
Operating temperature: -25 degree to +60 degree
Relative humidity: <95%
GSSS Std.: 802.11b/g/n
WiFi Safe mode: WEP/WPA/WPA2 (AES and TKIP for Personal)
Wi-Fi Performance Transmission Power: +20dBm,11Mbps(CCK)
Wi-Fi Performance Receiver Sensitivity: -89dBm,11Mbps(CCK)W
|Neutral wire requirement||Yes|