Z-Wave Motion, Light and Temperature Sensor (3 in 1 PIR)

A$88.00
Out of stock
SKU
DHS-ZW-SNMT-01

Discontinued item - we recommend the alarm grade Vision PIR or the Aeon Labs Multisensor.  The Motion/Temperature/Luminosity Sensor will send Z-Wave commands to any associated Z-Wave devices within its own Z-Wave network when someone enter/moves in the room or Temperature/Luminosity has changed.

Z-Wave Motion, Light and Temperature Sensor (3 in 1 PIR)

The Motion/Temperature/Luminosity Sensor is battery-powered Z-Wave device  with a small form factor. The Motion/Temperature/Luminosity Sensor will send Z-Wave commands to any associated Z-Wave devices within its own Z-Wave network when someone enter/moves in the room or Temperature/Luminosity has changed.

This unit contains three sensors that report values to the Z-Wave Gateway:

♦ Motion Sensor with adjustable sensitivity and timeout,
♦ Temperature Sensor,
♦ Luminosity (Light Level) Sensor reporting level of light.

It can also report its battery level as a percentage to the Z-Wave Gateway.

This sensor is perfect for closets, walk-in pantries or other rooms where you only need light when someone is physically in the room. You can set them to operate only when there is no natural light in the room, so they don't come on when someone enters the room during the day. It is very convenient when your hands full to reach for the switch. Luminosity sensor can adjust the amount of lighting—both the number of lights turned on and the intensity of the lights—based on the amount of sunlight in the room.

The product allows sending binary command wirelessly using a Z-Wave enabled (AUS/NZ version 921.42 MHz) transmitter to: controllers, switches, dimmers, blind controllers, fans, power boards, locks etc., as well as multilevel commands for temperature reading.

This sensor can be used to trigger security / warning application within Z-Wave network, lightning scenes and power on/off wireless switches.

♦ Small form factor
♦ Long battery life
♦ Optimized antenna range
♦ Ease of use and installation
♦ Support Z-wave association
♦ Low battery warning by led or battery life percentage report function by Gateway
♦ Send an alarm message to the Gateway

♦ Integrates with all certified Z-Wave controllers in Australian frequency (921.42MHz) 

 Technical Specifications

Description
 
RF Protocol
Z‐Wave (Multilevel Command Class)
Z‐wave device type
Z-wave multiple level dimmer, routing slave
Programmability
Programmable delay time, sensitivity, lux, wakeup time from controller
Operating Voltage
3V - 2 AA 1.5V Alkaline batteries
Status indicator
LED light
Mounting Bracket
Optional, could be installed on wall with a sticker
Sensitivity Distance
4-7 meter in 120° angle
RF Frequency
921.42Mhz ‐ AU/NZ  approved RF for Z‐wave
Operation Range
Up to 30m when no obstacles
Application
Indoor use only
Operation temperature
 -5-55 degree °C
Storage temperature
‐10 ~ 80 °C
Weight
42g
Housing
ABS 62x62x44 mm

 

More Information
Repeats z-wave signalsNo
DIYYes
Electrican RequiredNo