INSTEON Plug-in Relay module
A$69.00
Out of stock
SKU
IN2633-522
A full-featured plug-in on/off switch that can be remotely controlled by any other INSTEON controller. This on/off module controls all standard appliances like fans, fluorescent lights, and many other non-dimmable devices up to 15 amps and incandescent lights up to 480 watts.
Categories: INSTEON
General |
|
| Product Name: | INSTEON Relay (On/Off) - Plug-In |
| Product Code: | 2633-522 |
| Regions: | Australia and New Zealand |
| In the box: | INSTEON Relay (On/Off) - Plug-In |
| Warranty: | 2 Years |
INSTEON |
|
| INSTEON Powerline Mesh Repeater: | Yes |
| INSTEON RF Mesh Repeater: | Yes |
| INSTEON Controller: | Yes |
| INSTEON Responder: | Yes |
| Maximum links/scenes: | 400 |
| Status LED: | Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software) |
| LED brightness: | Adjustable from off to 100% bright |
| Beep on button press: | Beeps red to indicate traffic (must be enabled via software) |
| Local control: | Yes |
| Commands supported as controller: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim |
| Commands supported as responder: | On / Off, Fast On / Fast Off, Beep |
| Software configurable: | Yes |
| RF range: | Up to 50 meters feet open air |
| Phase detect beacon: | Yes |
| X10 support: | Yes |
| X10 addresses: | Any 1 of 256 (unassigned by default) |
| INSTEON device category: | 0x02 appliance module |
| INSTEON device subcategory: | AUS / NZ (921.0 Mhz), 0x36 |
Mechanical |
|
| Mounting: | Standard AC power outlet |
| Casing: | UV stabalized plastic (INSTEON White) |
| Set button: | Yes |
| Beeper: | Yes |
| Beep on button press: | Optional (off by default) |
| LED: | 1 RGB |
| Dimensions: | 43mm W x 108mm H x 35mm D |
| Weight: | 130g ± 10g |
| Operating Conditions: | Indoors, 0° C to 40° C, up to 90% relative humidity |
You may also like!
