INSTEON Plug-In Dimmer module

A full-featured plug-in lamp dimmer that can be remotely controlled by any INSTEON controller. Features an adjustable ramp rate, preset dim level and local control. Dual-mesh technology receives power line and RF commands.
General |
|
Product Name: | INSTEON Dimmer - Plug-In |
Product Code: | 2632-522 |
Regions: | Australia and New Zealand |
In the box: | INSTEON Dimmer - Plug-In |
Warranty: | 2 Years |
INSTEON |
|
INSTEON Powerline Mesh Repeater: | Yes |
INSTEON RF Mesh Repeater: | Yes |
INSTEON Controller: | Yes |
INSTEON Responder: | Yes |
Maximum links/scenes: | 400 |
Load brightness levels: | 32 locally (256 with software) |
Status LED: | Green / On, Red / Off, Blinks green or red during setup, Blinks red to indicate traffic (must be enabled via software) |
LED brightness: | Adjustable from off to 100% bright |
Local on-level: | Adjustable from 32 fixed brightness levels or resume dim |
Local ramp rate: | Adjustable from 0.1 second to 5 seconds locally (0.1 seconds to 8 minutes with software) |
Beep on button press: | Beeps red to indicate traffic (must be enabled via software) |
Commands supported as controller: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim |
Commands supported as responder: | On / Off, Fast On / Fast Off, Begin brighten / End brighten, Begin dim / End dim, Incremental brighten / Incremental dim, Beep |
Software configurable: | Yes |
RF range: | Up to 50 meters feet open air |
Phase detect beacon: | Yes |
X10 support: | Yes |
X10 addresses: | Any 1 of 256 (unassigned by default) |
INSTEON device category: | 0x01 dimmable lighting control |
INSTEON device subcategory: | AUS / NZ (921.0 Mhz), 0x12 |
Mechanical |
|
Mounting: | Standard AC power outlet |
Casing: | UV stabalized plastic (INSTEON White) |
Set button: | Yes |
Beeper: | Yes |
Beep on button press: | Optional (off by default) |
LED: | 1 RGB |
Dimensions: | 43mm W x 108mm H x 35mm D |
Weight: | 130g ± 10g |
Operating Conditions: | Indoors, 0° C to 40° C, up to 90% relative humidity |
Electrical |
|
Voltage: | 100VAC to 240VAC (± 10%) |
Frequency: | 50/60Hz auto-detected at power-up |
Max. load: | 300 W at 240VAC |
Load types: | Lighting: Incandescent, dimmable LED, dimmable CFL, dimmable halogen |
User replaceable fuse: | Yes |
Retain all settings without power: | Yes, saved in non-volatile EEPROM |
Standby power consumption: | <0.75W |
Safety approved: | Approved for use in Australia and New Zealand |
Certifications: | AS/NZS 4268, CISPR 22, IEC 60669-2-1 |