Fibaro Z-Wave Smoke Sensor / Detector

Out of stock

The Fibaro Smoke Sensor is a universal, optical Z-Wave smoke sensor. The device can be hard wired (12 or 24 VDC) or battery operated (battery life 3 years*). Smoke detection is signaled through siren and LED diode blinking. The optical sensor detects smoke at an early stage of fire, often before flames appear and temperature starts to rise significantly.


FIBARO Z-wave Smoke Sensor / Detector

The device has a built-in temperature sensor, which can also trigger the alarm once the specified temperatute threshold is exceeded.  The Fibaro Smoke Sensor is tiny at 65mm x 28mm and designed to be placed on a wall or ceiling. LED indicator signals fire, operating mode and used to see if device is within the Z-Wave network. 

Fibaro Smoke Sensor’s battery life is approximately 3 years when on optimum settings.

♦ May be connected to any alarm or fire prevention system by hard wiring NC output

♦ Extremely easy installation - simply install it in location prone to fire.
♦ Battery or VDC powered.
♦ Built-in tamper switch.
♦ Alarm is signaled by sound and LED diode.
♦ Fire detection through air temperature measuring.
♦ Can trigger alarm just by exceeding temperature threshold.
♦ 3 levels of sensors sensitivity.
♦ Automatic efficiency test performed every 5 seconds.
♦ Built-in “black box” allows the device to report and record smoke and temperature readouts.

♦ Integrates with all certified Z-Wave controllers in Australian version (921.42MHz) 

Please note: This is a battery operated smoke detector and does not have Australian certifications yet so do not rely on this detector as your primary detection device.  As such, we are only providing it so you can test out home automation scenes by using this detector as a secondary test smoke detector.  

 fibaro motion occupancy sensor


More Information
Repeats z-wave signalsNo
Electrican RequiredNo
You may also like!