DHS Z-Wave in-wall tubular AC Motor Roller Shutter Controller

DHS
A$79.00
Out of stock
SKU
DHS-ZW-TMC-01

DHS Z-wave Tubular AC Motor Shutter Controller is suitable to control and automate any 3 wires 240 AC motors such as roller shutters and blinds. 

DHS Z-Wave in-wall tubular AC Motor Roller Shutter Controller

DHS Z-Wave Tubular AC Motor Shutter Controller is single-motor controller for automated window-coverings that is fully compatible with Z-Wave™ wireless technology. It will work with any 3 wires 240 AC motors.

This device can be included in a Z-Wave™ network and may be controlled by other Z-Wave™ certified devices, making home automation simple and convenient. The Wave Tubular Motor Controller is packed with capability. This allows for custom intermediate stops to be set as a percentage of shade travel, and can be used to tilt horizontal blinds.

Installing this controller is as simple as connecting the motor and power supply wires as indicated in the manual. It is not necessary for the installer to have Z-Wave™ expertise. When commanded, the unit will run through an automatic calibration procedure, and may be joined to a Z -Wave™ network at a later time.

Features

♦ Control for motorized window coverings, projection screens, and awnings
♦ Simple installation – connect the motor and power supply wires
♦ Compact Footprint
♦ Intermediate stops as a percentage of shade travel
♦ Supports Z-Wave™
♦ Safety fuse
♦ Less than 1 Watt of Power consumption
♦ Controller available for AC motors

 Technical Specifications

Description
 
RF Protocol
Z-Wave (Multilevel Command Class)
Z-wave device type
Z-wave binary switch, routing slave
Operating Voltage
AC 230V / 50Hz
Max Loading
250V ~ a.c. 50Hz , 1.8HP
RF Frequency
921.42Mhz - AU/NZ  approved RF for Z-wave
Operation Range
Up to 30m when no obstacles
Application
Indoor use only
Housing
ABS
More Information
Repeats z-wave signalsYes
DIYNo
Electrican RequiredYes
Neutral wire requirementYes
You may also like!